Image of bread board with USR-WIFI232-T and 16C550 to connect it to Z80
In this article I want to present the WiFi board I have developed for my Z80. It should be no problem to adapt it to different processors as I utilize a 16550 to connect the serial interface of the USR-WIFI232-T to the Z80 bus as you can see in the circuit.
Meanwhile I have soldered most of the Z80 parts on some board connected by a bus board. I will describe the complete system running CP/M 2.2 in the upcoming posts, board by board. Continue reading Z80 work in progress→
I have found an old Z80 computer which was used in production in the 80’s. Specs seems to be a video card (or let’s say, a text card with video output), a Z80 MCU, 5,25″ floppy disk drive and a keyboard interface.
Front of the Z80 microcomputer with floppy disk, keyboard connector (lower left), reset button (right of keyboard connector) and the power button.
This is another project building a single board computer with an Z80 MCU alongside some RAM and ROM. In contrast to other well known projects I want to utilise an EEPROM which is very easy to handle. I also want to build a computer that works autonomously including an user interface and does not need additional microcontroller or a PC since both would be more powerful than the actual processor.
It is inspired by the SBC project by Grant Searle and therefore runs his modified version of Microsoft BASIC for the NASCOM computer. I further modified it for this SBC.